Acrylic (Cast/Standard)
Omtech MF2028-100 (CO2 100W)
1mm
| Color | Operation | Power (%) | Speed (mm/s) | Notes |
|---|---|---|---|---|
| Clear | Cut | 35 | 30 | Good clean cuts |
| Clear | Engrave | 20 | 400 | 600 lines per inch |
2mm
| Color | Operation | Power (%) | Speed (mm/s) | Notes |
|---|---|---|---|---|
| Black | Cut | 40 | 30 | Good clean cuts |
| Light Blue | Cut | 40 | 30 | Good clean cuts |
| Green | Cut | 60 | 12 | With masking tape |
| White | Cut | 60 | 12 | With masking tape and 3M tape |
3mm
| Color | Operation | Power (%) | Speed (mm/s) | Notes |
|---|---|---|---|---|
| Clear | Cut | 65 | 20 | Clean cut, not chipping |
Legacy Settings (Retired Machines)
xTool D1 Pro (Diode 10W)
| Thickness | Color | Operation | Power (%) | Speed (mm/s) | Notes |
|---|---|---|---|---|---|
| 2mm | Black | Cut | 90 | 5 | |
| 2mm | White | Cut | 90 | 5 | Didn't do anything |
| 2mm | Orange | Cut | 80 | 5 | Almost went through, warped the plastic |